Brent$92.59(≈RM381)▲ +2.17%WTI$83.65(≈RM344)▲ +1.21%Nat Gas$3.41(≈RM14)▲ +4.92%Bunker$842.00(≈RM3,463)▲ +0.96%JKM LNG$28.42(≈RM117)▲ +3.27%MGO$1115.50(≈RM4,587)▼ -0.27%EU Carbon€81.05(≈RM366)▼ -1.01%TTF Gas€89.54(≈RM405)▲ +2.21%Diesel$3.92(≈RM16)▼ -0.51%Coal$146.00(≈RM600)▲ +0.69%USD/MYR4.1125—RON95RM3.72(≈US$0.90)▼ -3.88% W/WRON97RM4.00(≈US$0.97)▼ -4.76% W/WDieselRM4.72(≈US$1.15)▼ -3.08% W/W
12:36 MYT
CommoditiesLife-SavingFirefightingManpowerPaintingDormitoryUAV TrainingConsultancy

Thermal Spray Aluminium, Where Paint Has No Realistic Life

A worker in a mask and ear defenders sanding a surface before it is coated

Thermal spray aluminium is not a premium paint. It is a metallic coating bonded by impact, and it gets specified where a conventional system has no realistic life and the asset is somewhere nobody will return to easily. By MarineCraft Journal  ·  16 October 2026  ·  9 mins read 2standards, one for … Read more

Passive Fire Protection: The Datasheet Is Not the Approval

A sprayer in a full suit and respirator coating fabricated steelwork

A product datasheet reports how something performed in one test, under one configuration, against one fire. Approving passive fire protection means knowing which fire, which configuration, and which properties the test deliberately left out. By MarineCraft Journal  ·  15 October 2026  ·  9 mins read 1093°Creached within five minutes under the rapid … Read more

Cathodic Protection and Coating Must Be Designed Together

A rope access technician in helmet and harness washing a hull with a pressure lance

Cathodic protection and coating are bought from different suppliers, designed by different engineers and inspected by different people. The failure that follows belongs to nobody, which is precisely why it keeps happening. By MarineCraft Journal  ·  14 October 2026  ·  9 mins read 2systems designed as one, or neither works as intended … Read more

Why a Tank Lining Is Tested and a Coating Is Only Inspected

A worker in a protective suit spraying in a paint booth

A protective coating on a structure is inspected. A lining inside a tank is tested, electrically, across every square metre of its surface. That difference decides how the work is scoped, who is in the vessel, and what happens when the result comes back positive. By MarineCraft Journal  ·  13 October 2026 … Read more

Dry Film Thickness and the 80/20 Rule

Close work applying a coat to steelwork in protective suit and respirator

Film thickness is the one coating parameter everybody measures and almost nobody agrees on. The argument always arrives after the scaffolding is down and the money is spent, and it is nearly always about criteria that were never written into the specification. By MarineCraft Journal  ·  8 October 2026  ·  9 mins … Read more

Corrosivity Category Belongs to the Asset, Not the Site

A sprayer in protective suit and respirator coating structural beams

A facility gets one coating specification because that is easier to buy and easier to apply. The structure then fails wherever the exposure was worst, on a schedule nobody planned for, and the specification is blamed for a decision made at procurement. By MarineCraft Journal  ·  7 October 2026  ·  9 mins … Read more