Fire Fighting Equipment & Services

A suppression system that hasn’t been maintained to specification is not protection — it’s paperwork that fails when it matters most.

Fixed and portable fire suppression equipment requires more than periodic inspection stickers. Cylinder pressures, detection system sensitivity, sprinkler head condition, and emergency pump test records are all items that surveyors and DOSH inspectors check independently of whether the equipment appears serviceable. We supply and support fire protection equipment for marine and industrial installations across Malaysia.

Our credentials

Certifications heldDOSHCIDB

Equipment categoriesFixed suppression, portable extinguishers, detection systems, fire hoses

CoverageVessels, offshore platforms, marine industrial facilities

Inspection & servicingAvailable on request

What We Know

How fire protection requirements apply in Malaysian marine and industrial contexts

📖

SOLAS Chapter II-2 fire protection requirements by vessel type

SOLAS Chapter II-2 divides fire protection requirements by vessel type and size: cargo ships, passenger vessels, tankers, and offshore supply vessels each have different fixed system requirements. The most common gap we see is operators applying cargo ship standards to vessels that are technically classified differently under their flag state survey — leading to under-specified protection.

🇲🇾

DOSH requirements for marine and industrial fire systems in Malaysia

The Department of Occupational Safety and Health (DOSH) enforces the Occupational Safety and Health Act 1994 and the Fire Services Act 1988 for industrial premises. For marine facilities and onshore operations, DOSH requirements for portable extinguisher placement, fixed system certification, and emergency response planning apply alongside SOLAS. Meeting one framework does not automatically satisfy the other.

🔥

Fixed vs. portable suppression — what each scenario demands

Fixed CO2 and clean agent systems are required for machinery spaces on larger vessels. Foam systems are standard for cargo pump rooms and tanker deck areas. Portable extinguishers serve as first-response equipment but cannot substitute for fixed systems where regulations require them. The regulatory language specifies both the type of agent and the activation method — manual-only systems are not acceptable in spaces that require automatic detection.

📁

The service records that surveyors check before they look at the equipment

A surveyor conducting a fire protection review will typically ask to see the maintenance log before physically inspecting any equipment. CO2 cylinder weight records, sprinkler test dates, and emergency pump run logs are all verified against the vessel’s planned maintenance system. Equipment that has been serviced but not logged carries the same risk as equipment that has not been serviced.

A Practical Guide

What fire protection items most commonly fail inspection

Fire equipment deficiencies in PSC and class surveys concentrate around a small number of recurring failure points. The most common is CO2 fixed system cylinder pressure below tolerance — usually because weight checks were not performed at the required interval, not because the system has actually discharged.

Sprinkler head failures are more subtle. Heads that have been painted over, physically damaged, or installed in the wrong temperature rating for their location will not activate correctly. They look intact during a visual check but fail under test conditions. SOLAS requires sprinkler systems to be tested at installation and at each class survey.

The most avoidable fire equipment finding is a portable extinguisher that is past its annual service date. Unlike fixed systems, portable extinguishers have a straightforward annual inspection requirement that is easy to track and easy to miss when there is no formal inventory system in place.

Pre-survey fire equipment checklist

✓

CO2 cylinder weights within tolerance per maintenance logWeight check interval per system manufacturer specification

✓

Sprinkler heads unobstructed, undamaged, and correct temperature ratingPainted-over heads are a common deficiency — check during any painting work

✓

Fire detection alarm panel tested and all zones confirmed activeTest records must be logged with date and tester identification

Portable extinguishers within annual service date and seals intactInclude extinguishers in secondary stowage locations, not just main stations

Emergency fire pump tested under load within 12 monthsPump must demonstrate correct pressure at the designed flow rate

Fire dampers operable from remote station and local positionDampers seized in the open position are a common machinery space finding

What We Supply

Fire protection equipment for marine and industrial installations

All equipment is supplied to SOLAS, DOSH, and relevant Malaysian fire services standards. Documentation packages including test certificates and installation records are available on request.

💨

Fixed CO2 & Clean Agent Systems

Total flooding systems for engine rooms, pump rooms, and electrical spaces. Supply, installation, and annual weight certification.

Regulatory basis: SOLAS II-2/10

🧭

Foam Suppression Systems

AFFF and FFFP foam systems for cargo pump rooms, tanker decks, and industrial storage areas. Fixed and portable delivery options.

Regulatory basis: SOLAS II-2/11

🧰

Portable Fire Extinguishers

CO2, ABC dry powder, and wet chemical types for vessel and industrial use. Annual servicing and hydrostatic testing available.

Standard: DOSH / MS ISO 7165

🛑

Fire Detection & Alarm Systems

Smoke, heat, and flame detectors with addressable control panels. Suitable for vessel accommodation, machinery spaces, and industrial buildings.

Standard: SOLAS II-2/7 / DOSH

🔥

Fire Hoses, Nozzles & Connections

SOLAS-compliant fire hoses and nozzles, international shore connections, and fire hydrant fittings for port and vessel use.

Regulatory basis: SOLAS II-2/10.2

👩‍🚒

Firefighter’s Outfits & BA Sets

Complete firefighter’s outfits, breathing apparatus sets, and SCBA cylinders. Hydrostatic testing and cylinder refill services available.

Regulatory basis: SOLAS II-2/10.10

Get in touch

If you have a question about your vessel’s or facility’s fire protection requirements, we’re happy to advise.

Whether you need a full system supply, replacement components ahead of a survey, or guidance on what DOSH and SOLAS require for a specific installation, our team can help. We respond to all enquiries within one business day.

Send an Enquiry

Or reach us at our contact page